Breathe together in nature
DECO RIN, SHINWON DECOIt can be used for a wide range of applications, including furniture and home decoration.
Finishing foil means a sheet that is prepared by printing on printing paper (40 g ~ 200 g / m²), impregnated with titanium, impregnated with a water-soluble resin, and then applying water-based varnish to the surface. Over a long period of time, various methods have been tested to obtain the texture of printed paper or PVC material, such as natural wood, and the deep taste of natural wood is reproduced so that consumers can feel the soft touch of paper made from wood and the processability of plastic PVC material. It is material with evenly.
It is used in various ways because it has a finish film suitable for people and the environment, a soft touch to natural wood, workability of plastic sheets, abrasion resistance, solvent resistance and dirt resistance.
It is environmentally friendly, harmless to the human body and is able to feel the warmth of wood.
There are few toxic substances such as chlorine gas, VOCs, and dioxin, and there is no exposure to toxic substances during a fire or burning.
Since it is integrated with wood, there is less shrinkage due to thermal distortion and it is wound in the form of a roll, so the loss rate during processing is low.
The color change caused by high temperature and high pressure was maximally compensated.
Since it is integrated with wood, there is less shrinkage due to thermal distortion and it is wound in the form of a roll, so the loss rate during processing is low.
1. Finish reputation foil Hydraulic finish foil, type of surface hardening
- Fast production speed (high adhesion possible)
- Less loss due to roll type
- Eco-friendly products
- Different shine is also possible
(glossy, matte, semi-bright, etc.)
3. Finish salon foil
Inner sheet with adhesive on the back of the foil for direct finish
2. Foil packaging Finish film of soft type, flexible type.
- Performance similar to PVC
- Gives a warm wood feel.
- Fast performance
- Low volatile organic matter and formaldehyde
emissions
- Different chandeliers (glossy, matte, semi-gloss)
4. Finish using the edge of the foil
Finish slitting a small amount and trim the foil to the MDF and PB edge